Description
Product Introduction:
The Z-mod robotic actuator is beautiful in appearance, highly integrated, small, and powerful. It simplifies the installation steps.
ST series electric actuators have many advantages.
Advantages:
- The screw series controller is built-in, and the belt series controller is external.
- It has a base level of high precision.
- Nuts have zero backlash.
Product Features:
- With the ratio of the maximum stroke to the total length under the same effect stroke, the total length is shorter.
- It is more suitable for occasions such as small load, high speed, and small space.
- It’s tight enough that neither the screw nor the timing belt is exposed.
Product Parameters:
| Item No.: | HL42CM06 | |
| Rated Torque（N·m） | Check Curve performance diagram | |
| thread pitch（mm） | 54 | |
| The Max Speed（mm/sec） | Horizontal：300（load 1.5kg） | Vertical：220（load 1.5kg） |
| Accelerated speed (mm/sec²) | / | / |
| The max load capacity Horizontal/Wall Mounted（kg） | 4 | |
| Vertical | 1.5 | |
| Thrust Rating（N） | 30（Horizontal） | |
| Stroke Range（mm） | 100-500（100 interval） | |
| Rated Speed of Motor（RPM） | Check Curve performance diagram | |
| Notice：1G=9800mm/sec2, the max speed is just for reference, the load and speed are inverse | ||
| Repeatability | ±0.03mm | |
| Driving Mode | Synchronous belt | |
| Dynamic max moment allowed（notice 1） | Ma：34.7N·m，Mb：34.7N·m，Mc：55.6N·m | |
| Allowable extension length of load | 120mm | |
| Sensor | / | |
| Cable length of sensor | 1.5m | |
| Base Material | Extruded aluminum，Black Glossy | |
| Precision requirement of Installation area | Evenness 0.05mm below | |
| Working Environment | 0-40°C,85％RH]（No Frost） | |
| Note 1：The value is under the condition of 10000km walking life | ||
Product Diagram:
Reviews
There are no reviews yet.